Accelerometer Issues
First, please first make sure that your motion backlight is enabled. To do this, please go to Settings, Display, and then Motion Backlight. If your settings are configured correctly, please try letting the battery drain completely and try again.
Instructions:
-
Completely discharge the Pebble so that it shuts down.
-
Try to turn on the Pebble with the select button, if you see the Pebble logo and the watch turns off by itself keep holding the select button until the watch no longer turns on with the Pebble logo.
-
After verifying that the watch is completely discharged, please charge your watch and turn it on and test the motion sensor.
If the accelerometer is still not functioning correctly after attempting the above, please Contact Support. Be sure to mention that you have read and tried the suggestions in this article.