Original and Steel Accessories

Last Updated -

Original Pebble Bands
The Jet Black Classic Pebble ships with a black latex-free, polyurethane band that has a stainless "surgical" steel clasp (approximately 8-10% nickel). It can accommodate wrists with a circumference between 14cm and 21cm.

The original Pebble's bands are 22mm wide and secured by collapsible spring pins.  They can easily be exchanged for most standard 22mm bands, available online or in stores wherever watches or watch accessories are sold.

Unfortunately, additional watchbands for the original Pebble are not available from GetPebble at this time. However, there are third party websites, such as Clockwork Synergy or Richard Tracy Brand that sell watchbands specifically designed for Pebble.


For instructions about how to change the Pebble's bands, please click here.
 


Pebble Steel Bands

Pebble Steel ships with a black leather band. It is 8-1/16 inches or 205 mm and made of Genuine bovine hide grain leather. Unfortunately, additional leather bands are not available from GetPebble at this time

However, if you would prefer, we also have three optional metal bands available for purchase on the website (listed under Accessories) or through retailers such as  Amazon.com or Best Buy USA.

The regular metal band is 8.5 inches or 215mm, but can be adjusted down to a minimum of 160mm. Available in both the Brushed Stainless and Black Matte finish, it is made from 316 grade stainless "surgical" steel, so it has approximately 8-10% nickel. The Black Matte band has a PVD finish. The premium metal band is 8.66 inches or 220mm, but can be adjusted down to a minimum of 6.85 inches or 174mm. It is made from forged, solid 316 grade stainless steel and has a micro adjustment in the clasp. It is very durable with a heavier feel. 

However, as with the original bands, there are third party sites such as Clockwork Synergy or the Richard Tracy Brand's SHANK that do sell bands designed specifically for Pebble Steel.  Additionally, SteelConnect has created an attachment that can be used with Pebble Steel to make it compatible with any standard 22mm watch band

For instructions about how to change Pebble Steel's Bands, please click here.


 

Charging Cables

Each version of Pebble has its own special USB cable, which attaches magnetically to the charging port on the left side of your Pebble below the back button. 

Due to the  the Original and Steel charging cables are not cross-compatible.
The picture below will help you distinguish between the two, to make sure that you use and purchase the correct one for your Pebble.

 


Both original and Steel cables are available on our website (listed under accessories) for $15 USD with free shipping. They are also available for sale through Best Buy USA.


 

Third Party Skins

One of the easiest ways to customize the appearance of your Pebble is to apply a skin.
There are several third party websites that sell designs and protective covers for Pebble. These designs include colors, textures, flags, animal or wood patterns, metal finishes, and even glow-in-the-dark.

To browse and purchase skins and covers, please visit GadgetWraps, Skinomi, SlickWraps, or DecalGirl.
Or, if you would prefer a 3D printed, snap-on cover, check out Pebble Watch Covers.

 

Did you find this article helpful?